Economic Solder Fume Extractor, Specail Design Filter Solder Fume Extractor, with 3-in-1 filter
|Filtering Efficiency:||0.3micron 99.97%|
|Diameter of Dust:||65mm|
|Noise:||Less than 59db|
|Machine Adjustement:||Speed Adjustment Knob|
|Motor Lifetime:||20,000 hours|
Waterun, established in 2005, is a China National Hi-Tech Enterprise. Located in Shenzhen China, we have been focusing on the purification of harmful fumes for nearly 15 years. Waterun has become the leading manufacturer of fume extractors in China. Our products are widely used for eliminating Solder Fumes, Laser Fumes, Welding Fumes, Beauty Salon Fumes, Medical Fumes, 3D Printing Fumes, etc.
It has a triple-filter system:
1) Pre-Filter: the large-size pad filter can filter large particles of dust
2) Middle Filter: it filters the bigger powders for prolonging the main filter's life.
3) Main Filter: it includes HEPA (high efficiency) filter and gas filter. The HEPA cleans the gas and powders filtering from the pre-filter and then carry them to the gas filter. which with the carbon and other chemical combination, filters off the rious substance and then outputs the clean air.
1.The fume extractor is designed to filter the harmfu substances.
2.The ducts of fume extractor can be bent or lengthened as desired and maintain the shape.
3. The solder fume extractors catche harmful smoke with freestanding ducts and adjustable air volume to significantly improve your working environment.
4. Wheels are available for the fume extractor which is easy to move and station.
5. The fume extractor has a triple-filter system design for better purifying effect.
6. We sell truly sensitive and effective "Filter Clogging Alarm System"
1.With the intelligent control panel and digital display, the operation becomes easy and simple.
2. Equipped with the remote control, the operator can control the machine from a distance.
3. Effective "Filter Clogging Alarm System" notifies the operator to replace the filter in time
4. The High-voltage and large-volume brushless motor, ensure low vibration, low noise, stable operation. and long life span.
5. Ducts can be bent or lengthened as desired and maintain their shape after adjustment, letting you place them exactly where suction is needed.
6. The machine surface is made of metal, more corrosion resistance and durable
7. With square absorbing hood which have bigger filter area
8. Provide trundle with brake, easy to move castors
9. Long Service Life
10. Low using cost
11. Thorough purification 0.3um 99.97%
Waterun Fume Purifying and Filtering System is for cleaning of both particles and gases. It is designed to filter the harmfu substances, such as hydrocarbon and cyanide, during the process of soldering, tin dipping in the solder pot, laser marking and carving, printing, etc. It catches harmful smoke with freestanding ducts and adjustabl air volume to significantly improve your working environment.
Our company uses a brushless motor, compare with the ordinary motor, this motor speed is higher, lower noise, it does not require maintenance, but longer product life span. Self-developed impeller, better quality than ordinary plastic impeller, more stable, more powerful suction. The unique tiered filter design, can effectively purify the toxic and harmful substances in the air, such as formaldehyde, benzene, ammonia, radon gas, sulfur dioxide..etc, and use of low cost.
Compared with the products from foreign countries, our products in terms of the effect is almost the same, but the majority of our products are less than USD2000, so our products are cost-effective, and the use of more affordable cost. The products from abroad mainly purify the viruses and bacteria as the main direction of governance. In China not only to purify viruses, bacteria, but also clean harmful smoke pollution. WHO estimates that there are over 200 million people deaths each year due to inhalation of indoor and outdoor air pollution in small particles.
1. What’s the functions for the filters?
Answers. 1) Pre-Filter/F8 pre-filter: the large-size pad filter can filter large particles of dust (according the requirement to select pre-filter or F8)
2) PP Middle Filter/Fiber glass filter: it filters the middle-size, small size particles bigger powders for prolonging the main filter's life. (according the requirement to select PP middle filter or fiber glass filter,can use both, the efficiency better.)
3) Main Filter/Active carbon: it cleans harmful particles and fumes.
4) High efficiency filter(combine middle filter and active carbon filter): it can filter about 0.3micron particles and other harmful fumes.
2. How long need to to replace the pre-filter, middle filter and the main filter?
Answer: 1. Pre-filter : normally needs to replace by 1 months
2. Middle filter: normally needs to replace by 3 months
3. Main filter: normally needs to replace by 6 months.
3. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.